Skip to product information
1 of 4

B.E.S.T water filter (Bare 3/4"bsb threads)

B.E.S.T water filter (Bare 3/4"bsb threads)

Regular price $129.95 AUD
Regular price Sale price $129.95 AUD
Sale Sold out
Tax included.

This B.E.S.T. Inline, model 322B (B is for Bare 3/4" bsp threads), is ready for fittings to be installed.

Australian Made & Owned


This unit is mainly recommended for when you are replacing your current unit, so you can re-use the fittings from your old B.E.S.T. Inline water filter.

Please be advised - the B.E.S.T. Inline water filters require commissioning (first flush) to be done on a hose line, as the unit needs to be flushed from both directions repetitively to clear the carbon dust from the unit. This means, if you are purchasing this unit for the first time, you will need to have a set of 3/4" x 12mm hose 'click' connectors.  If you do not have these fittings, please purchase one of our 'On the Hose' model Inlines instead - 

B.E.S.T. Inline with Plastic hose connectors

B.E.S.T. Inline with Brass hose connectors


Information on the B.E.S.T. INLINES:

The B.E.S.T. Features

  • CHEMICAL/DIRT REMOVAL (TASTE & ODOUR): Our 322HB B.E.S.T. Inline Water Filter contains a combination of high quality carbons (chosen to suit Australian water conditions) to remove a broad spectrum of contaminants; 
  • DUAL MEMBRANES: 5 micron and 1 micron membranes are located at both ends of the B.E.S.T. Inlines to ensure fine filtration;
  • "SilverSafe" TECHNOLOGY: Two full beds of "SilverSafe" are included to kill harmful bacteria and keep your B.E.S.T. Inline bacteria free during extended storage periods;
  • LONG LIFE: Due to lack of bacteria within the B.E.S.T. Inlines, this means there is no reason for 'regular interval' replacement. The reason all other water filters recommend a replacement time period (ie. every 6 or 12 months) is that the bacteria levels can increase to an unhealthy level. With B.E.S.T., we have eliminated this problem, so you replace ours when the carbon's life has expired - not when the bacteria sets in! 
  • REVERSIBLE / BACK-FLUSHABLE: The inside of the B.E.S.T. Inline water filter is a mirror-reverse, allowing it to be back-flushed to eliminate the build-up of contaminants on the membranes.
  • SEALED:  No cartridges to replace
  • COMPACT: Our filter was designed by us to be compact, portable and portable for the travelling community. 

   "'s the SilverSafe® that sets B.E.S.T. apart from the rest!"
(Caravan and Motorhome magazine)


The B.E.S.T. Specifications

    Dimensions (without packaging, with with NO fittings installed): 282mm* x 60mm x 60mm [*plus the fittings required for installation.)

    Connection: 3/4" bsp female threads. 

    Micron Rating: The B.E.S.T. Inlines have dual membranes on each end - a 5 micron, followed by a 1 micron.

    Flow Rate: 0 - 15 Litres per minute (dependant upon incoming pressure)

    (TIP - The slower water flows through all water filters, the better the contaminant removal will be. If you've got the time, do a slow fill into your tanks.)

    Max Pressure: Complies with Australian Standards -  Holds 2100 kPa over a 15 minute period

    Min. Pump Pressure Required: Min. 35 psi or higher

    Min. / Max. Temperature: 1°C to 40°C

    B.E.S.T. Filter Life: There is no time limit to replacing the B.E.S.T. Inline. (*See 'The B.E.S.T. Features' above.)

    The carbon is rated to treat a minimum of 5,000 Litres of chlorinated water.  (This is rated on chlorine being added at the maximum allowable level in town water supplies.)

    Why is B.E.S.T. different from the rest? 

    Only B.E.S.T. has the "SilverSafe"

    The incorporation of our "SilverSafe" technology in every B.E.S.T. Inline means that our filters are kept bacteria free for the life of the filter. Where all other filters that promote 'silver technology' (ie. silver-impregnated, silver infused, nano-silver, etc.) to be included, which is usually a silver solution sprayed onto the carbon, or small granules dispersed throughout the filter, the B.E.S.T. includes a full bed of "SilverSafe" in each end of our Inlines to ensure that all water comes in contact with the "SilverSafe" to kill any harmful bacteria and to keep the filter bacteria free when stored away.

    Our Inlines are truly Back-flushable / Reversible

    Another reason B.E.S.T. is better than the rest is it's back-flushing feature. Most other inline water filters promoted for RV/Caravan/Etc. use have a single flow direction. Our B.E.S.T. Inlines have no flow direction - meaning that when the flow of the water slows, simply turn it around; run town pressure water through in the other direction (flush this water to the ground - you will see the dirt flush away) then reconnect the filter into your water line).

    Please NoteDon’t confuse these with a silver impregnated carbon system designed for the domestic market. Although silver impregnated is marketed in the RV industry, they will still breed bacteria. ONLY B.E.S.T. has the SilverSafe®.

    Only B.E.S.T. has the "SilverSafe"
    B.E.S.T. is... Bacteria Eliminating "SilverSafe" Treatment

    Australia's B.E.S.T. Inline Water Filter was designed, hand assembled and made here in Australia!

     Over 95,000* of our B.E.S.T. inline filters sold in Australia and Internationally.
    (* As at January 2022)




    Here at AMD Touring we are proud to make it easy to find high quality Australian made 4x4, camping and caravaning gear.

    View full details

    Customer Reviews

    Be the first to write a review
    Australian Made Retail Supporter